£ per Litre is for your comparison and information only.
Buy now price includes vat.

Please allow for carriage as appropriate

Please allow for appropriate carriage.
Delivery typically 5 -10 days.
If urgent - Let us know!

Recovery table above gives the time taken in minites
to heat the volumes shown 50'C - Say 15 to 55'C
Actual time will be limited by either boiler kw or coil kw size

The table above gives typical household/ person,
solar collector, solar coil ratios

TECHNICAL SPECIFICATION - STANDARD SOLAR CYLINDER

Copper "Open Vented" for use with CWS (cold water storage) tankGrade 3 - 0.7mm wall thickness - 10 mtr head - max height to CWS water levelGrade 2 - 1.6mm - Thicker base for longer service life.Cylinder and coils to BS 1566 (minimum) Part 'L', Kitemarked and Clear Skies approvedBoiler coil .52M2/ 18kw positioned to heat circa 95/117 Litres on cylinders below/above 260 Litre
  Some competito coils are as small as .24M2Boiler fittings 3/4" Male (1" if solid fuel) 22mm and 28mm respectively if compression fittings chosenSolar coil 1.62 M2/ 55kw. 22mm compression as standard.Hot/ Cold 3/4" Female as standard. 22mm if compression fittings chosenAll bosses brought to foam surface = Ease of installation and greatly reduced heat loss.All fittings in line *- unless you specify otherwise "custom cylinders" fee appliesCold feed * at 45' to the right and left - Block the one not needed or use as a drain point.Immersion element boss in domeSensor pockets 10mm x appx 200mm immersed tube. Suits all common sensors.Insulation CFC and HCFC free (zero ODP) pu green foam 47~50mm as standard.